Operating your Heater from the APP
Mobile phone remote operation (connect heater power
and turn on the side switch, so that the heater is in
standby mode).
Open the “GOLDAIR" APP to select the heater (when
using one mobile phone to control multiple heaters, you
need to select the heater to be operated).
•
Select the heater to be operated and enter the
operation interface.
If the phone interface color is dark red, this indicates
that the heater is in the OFF standby setting.
•
Tap the OFF icon and the heater will turn on.
The display will change to bright red.
•
You can now control the heater.
•
To turn the heater off again tap the power icon and
the heater will revert to the dark screen.
TEMPERATURE SETTING:
•
Tap the "+" or "-" button to set the temperature.
•
When the set temperature is higher than the
ambient temperature, the heater begins to heat.
•
If the heater temperature setting is below ambient
temperature the heater will be in standby mode and
will not operate until the ambient temperature drops
below the set temperature.
Depending on which mode you are in you can set the
temperature as below.
Comfort mode can be set from 5
–
35
o
C
Economy mode can be set from 5 - 31
o
C
(this is pre-set so there is always a 4
o
C difference
between Comfort and Economy settings)
LED Display Icon
Tap this icon to turn off the LED display on the heater.
This does not affect the operation of the heater.
To turn the heater display back on, tap the icon again
Dark Red
–
Heater Off
Bright Red
–
Heater On
Summary of Contents for Platinum HeatSmart GPPH710
Page 1: ......
Page 2: ...This page has been intentionally left blank...
Page 23: ...This page has been intentionally left blank...
Page 24: ......