Pairing APP to Heater
•
On your phone tap 'Add Device' to connect to the device. The WiFi LED display
should be flashing when you turn the device on, however if it is not, hold down the
SWING button for 5 seconds or until the LED flashes.
•
Tap 'Confirm indicator rapidly blink' on your phone.
•
Choose/confirm which WiFi to connect to.
Note: your phone may pick up other WiFi signals (e.g. neighbours) so you will need
to choose.
•
Enter your WiFi password
•
The phone will then connect to the device. Ensure you have a good strong signal
from your WiFi router.
Note: The WiFi indicator on the device may go off during this pairing process.
•
Once complete the screen showing the device has been successfully added will
appear.
•
Rename your device and choose the relevant location eg Master Bedroom.
•
Tap 'Completed' to continue. To add additional Goldair devices to your app, tap
'Add Device' and repeat above process.
•
If the phone and device fail to connect, then you will need to try to connect again
as per the above process.
•
Click on your paired device and the main control screen on your phone will appear.
