TOOLS REQUIRED
✓
Drill
✓
Hammer
✓
Phillips head screwdriver
✓
Spirit Level
LOCATION
The appliance should be placed with a minimum distance
of 1 metre between the unit and flammable objects such
as curtains, paintings or other materials that may pose fire
risk.
Installation of the appliance on the wall MUST BE 1.8m
above the floor.
Installation of the appliance on the wall MUST BE 20cm
away from closest side wall.
Installation of the appliance on the wall MUST BE 30cm
from the ceiling.
WARNING:
Do not mount directly under or
over an electrical
power socket;
it
is
recommended to install the appliance to the
side of the power socket.
The appliance is designed to be installed 1.8m
above the floor. As the cord length is 1.5m, an
electrician may be required to install a power
socket nearer to the appliance.
INSTALLATION
1.
Drill two holes on the wall allowing 1.8metres
between floor and bottom of appliance and 20cm
from side wall to side of appliance.
2.
Measure the distance between the mounting holes
on the back of the appliance and then mark the wall
at the measured distance. Ensure that the marks you
make are level.
3.
Be sure to make the hole diameter the same as the
expanding screw pipe.
4.
Place the expanding screw pipe into the hole in the
wall and then fix two screws on the expanding pipe.
5.
Keep the tips of the screws out approximately 10mm,
and hang the appliance.
6.
Ensure that the screws are held in firmly enough to
hold the weight of the appliance.
7.
Slide the appliance across to the right and then down,
locking the appliance mounting bracket to the screws
in the wall.
Installing your Appliance
