![background image](http://html1.mh-extra.com/html/goldair/platinum-gas10/platinum-gas10_operating-instructions_2240070004.webp)
Cleaning and Maintenance
CLEANING:
To avoid risk of electric shock, before
cleaning, you MUST ALWAYS switch off
and unplug the fan before cleaning.
Use only a soft, damp cloth to gently
wipe the fan and dry well.
Do not immerse the fan in water and
never allow water to enter the motor
housing.
Do not use harsh chemicals to clean the
fan.
MAINTENANCE:
Before removing the filter, turn the fan off
an unplug from the wall.
Press down the release lever and pull
out to remove the cover for the filter.
The washable filter can be cleaned with
a vacuum, or removed and rinsed off
with water.
NOTE:
Insure the filter is completely dry
before installing back into your fan.
Clean the filter as needed, or every two
weeks; this will help to maintain optimum
filter performance.
Remember to clean the filter before
storing at the end of the season and
again when bringing the fan our of
storage.
NOTE:
Never use the fan while the filter
in uninstalled.
Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
Remote Control Stow
Washable Filter