Assembly
Before using this appliance, it must have the castor plates and castors fitted.
The screw pack to attach the feet to your appliance will be taped to either one of
the feet for your appliance, or taped to the plug.
Carefully turn the Main Body upside-down on a
scratch-free and stable surface.
Be careful to
prevent damage to the cosmetic finish or your floor
surfacing (Fig.1).
Fit the wheel assemblies onto the Main Body by
placing the U-shaped bolts between the outermost
fins on each side of the Main Body (see Fig.2 - 4).
Securely fasten the wheel assemblies onto the
Main Body by screwing the wing nuts onto the U-
shaped bolts (see Fig. 5).
WARNING: Operate the appliance in normal
upright position only with wheel assemblies
attached to the bottom. Any other position
could create a hazardous situation.
