OPERATING YOUR HEATER
Before operation place the product on a flat, stable, heat-resistant surface. Plug the power cord into a
standard 230/240 volt AC electrical outlet.
•
To turn the heater on set the MODE switch to I.
•
For LOW heat turn the power setting knob to the I position.
•
For MEDIUM heat turn the power setting knob to the II position.
•
For HIGH heat turn the power setting knob to the III position.
MODE SWITCH
•
This switch is located on the timer dial.
•
To turn the heater ON position the mode switch to (I)
•
To turn the heater ON & OFF using the timer, position the mode switch to
•
To turn the heater OFF position the mode switch to (0).
THERMOSTAT
•
Once you have selected the desired power setting, turn the thermostat control clockwise as far as it
will go and the indicator light will illuminate.
•
Leave the thermostat control at its maximum position until the desired room temperature is reached.
•
Slowly turn the thermostat knob anti-clockwise until the heater shuts off. (Indicator light goes off.)
•
Leave thermostat setting at this position. The heater automatically cycles on and off to maintain the
chosen room temperature, (the indicator light also cycles on and off). As long as a power setting is
selected (and there is power supplied to the heater) the heater operates.
TIMER
•
Set the MODE switch to the Timer position (this function can only be used once a heat level has been
selected (see thermostat, power settings).
•
Turn the outer dial of the timer in a clockwise direction until the time of the day (24-hour clock)
corresponds with the triangular marking. One complete turn of the dial corresponds to 24 hours.
•
There are 96
“riders”, positioned around the dial, each rider represents 15 minutes. When the “riders”
are pushed out the heater will turn on when they travel past the triangle marking on the casing. You
need to push out the riders to correspond with the time the heater is to turn on.
TURBO/CERAMIC HEATER
(GOC207T & GOC2011TH Model only)
•
The turbo function is for supplying heat instantly whilst the main heater warms up. For turbo heat,
switch the Turbo ON/OFF using the switch on the front of the turbo cover. Turbo function is also
governed by the thermostat and timer/mode settings.
FULL SIZE OIL COLUMN SPECIFICATION
Model No: GOC207T, GOC209T, GOC2011TH
Power Supply: 230-240V, 50Hz AC only
Power: 1500W, 2000W, 2400W
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
