OVERVIEW OF GOLDAIR MICATHERMIC HEATER
Your Goldair Micathermic Heater is designed to provide instant personal and background heating. The
Micathermic heating panel self regulates energy consumption thereby minimizing power usage.
Micathermic heating uses both radiant and convection heating technology. Natural convection currents
distribute the heat evenly throughout the room, while radiant heat from the heating surface warms people
and objects in the room. Micathermic heating is extraordinarily safe and reliable as it produces no odours,
doesn't burn oxygen or stir up dust; and has no glowing elements. This heater is equipped with two manual
heat settings and a auto function which allows you to set the desired room temperature and the heat will
adjust its output to maintain this. In addition the heater has a programmable timer so you can set how long
you require the heater to operate for or a delayed start time function.
INDICATION LIGHTS & CONTROL BUTTONS
ASSEMBLY INSTRUCTIONS
A. High Heat Indicator Light
B. Low Heat Indicator Light
C. Auto Heat Indicator Light
D. Mode Button
E. Increase Button
F. OFF Button
G. Decrease Button
H. Timer Button
20°C
28°C
4h
00:00
Current Room
Temperature
Timer
Selected Room
Temperature
Duration
Remove all product pieces from the packaging remembering to keep all plastic bags away from children or
animals.
Freestanding:
1.
Carefully turn the heater upside down, attach the feet to the base ensuring they click into place.
2.
Return the heater to the its upright position and operate as per the operating instructions.
Wall mounting:
1.
Check you have 1 bracket, 2 screws and 2 toggles in a separate plastic bag. (Mounting screw and
toggle provided is for masonry walls only (brick, stone, cement). When mounting onto gib you will need
to purchase gib toggles and follow the instructions provided with those fastenings.)
2.
Position the heater within two metres of a wall socket.
3.
Position the mounting bracket between 570mm and 720mm from the floor.
4.
Use a nail to mark out the two holes onto the wall and remove the bracket.
5.
Drill the holes with a 6mm drill bit to sufficient depth to allow the toggle to be inserted.
6.
Gently tap the toggles into place.
7.
Place the flat side of the mounting bracket against the wall and insert the screws.
8.
Screw in until fastening is firm, do not over tighten.
9.
Fit the micathermic heater onto the bracket, push the heater to the right, and lower again to secure in
position. Plug heater into wall socket and operate as per the operating instructions.
