Overview of your Micathermic Heater
Micathermic heating uses both radiant and convection heating
technology. Natural convection currents distribute the heat evenly
throughout the room, while radiant heat from the heating surface warms
people and objects in the room. This heater is equipped with two manual
heat settings and an adjustable thermostat.
1.
Heater
2.
Control Panel
3.
Front Panel
4.
Wheel Bracket
5.
Wheel
FEET ASSEMBLY
3
2
5
1
4
1.
Power indicator light
2.
Power Switch I
3.
Power Switch II
4.
Thermostat
1
3
2
4
1
Fixing
Screw
Castor
Spring
Gasket
Flat
Gasket
Wheel
Bracket
Wheel
Bracket
Flat
Gasket
Spring
Gasket
Standard
Screw
Heater
PICTURE A
PICTURE B
Install castor
Take out four castors, two wheel brackets,
four fixed screws, four flat-gasket of 4mm diameter,
four spring-gasket of 4mm diameter from list.
According to picture A, Firmly install castor on
wheel bracket.
Install wheel bracket
Take both wheel-brackets once castors installed,
take two Standard Screws, two flat-gasket of 5mm
diameter, two spring-gasket of 5mm diameter.
According to picture B, firmly install wheel-bracket on
the bottom of the Heater.
