FITTING YOUR GOLDAIR FITTED ELECTRIC BLANKET (GFS & GFF Models)
Place the Electric Blanket on the mattress with the skirt on top of the Electric Blanket.
Ensure the end of the Electric Blanket with controls is at the top end of the bed. See Fig 1.
Once the Electric Blanket is in the correct position fit the skirt over the mattress.
Connect the Electric Blanket controls into the sockets on the Electric Blanket and plug into a
power point and turn on. The cord and control switches must be kept outside the bed and away
from external heating sources, such as heaters or bedside lamps. Cord must not be bent over the
edge of the bed.
The power cord must be positioned to prevent being sat on or rolled on when getting in or out of
the bed. If the power controller cord is sat on or trapped between the bed edge and the user on a
regular basis it will be damaged over time resulting in premature failure or fire.
Fig 1.
Fig 2.
Fitting your Goldair Electric Blanket
TECHNICAL SPECIFICATION
Supply:
220-240VAC 50Hz
Wattage:
55-60W
GST-SS
Wattage:
60-70W
GST-LS, GST-Q (x2), GST-K (x2), GFF-K (x2), GFF-SK (x2)
Wattage:
70-80W
GFS-LS, GFS-DQ (x2) , GFS-K (x2), GFF-LS, GFF-KS, GFF-DQ (x2)