WARNINGS AND SAFEGUARDS
To obtain maximum benefit from your Goldair Electric Blanket please read the instruction manual
carefully and ensure this is understood before using the product.
1.
Before using the blanket, make sure the power supply is 230-240V, AC, 50Hz as this is the
voltage specified.
2.
Do not use an extension cord with this product.
3.
Do not use if the blanket has a damaged cord as this may lead to overheating or personal
injury.
4.
Do not use heavy or dense over blankets as they may lead to overheating of the electric
blanket.
5.
Do not trap or fold cords between bed slats, mattress, or springs, or against walls,
headboards or bed frame as this may cause damage to the cord.
6.
Do not use the blanket on a bed used by an infant, incapacitated person, paraplegic,
quadriplegic, diabetic, anyone sensitive to heat or someone who can not clearly understand
the instruction and/or operate the controls.
7.
The product is not to be used by young children unless the controls have been preset by a
parent or guardian or unless the child has been adequately instructed on how to operate the
controls safely.
8.
This product is not intended for medical use in hospitals.
9.
If you find any damage with your blanket, disconnect the appliance from the power supply
immediately and contact your nearest authorized service agent.
10.
Do not use this product on a damp mattress or on a water bed.
11.
Do not use on an adjustable bed.
12.
Do not pinch, flex, or expose the heating wire. Damaged heating wire may cause a fire hazard
or personal injury.
13.
Keep the control unit away from an open window.
14.
Turn off the blanket and disconnect the power cord when not in use.
15.
Do not dry clean the blanket. Do not use bleach or harsh cleaning fluids as the cleaning liquid
may damage the insulation of the heating element.
16.
Do not use any pins, needles, safety pins or other sharp items on your electric blanket as they
will damage the electric wiring.
17.
Keep all dogs, cats, and other pets away from the product.
18.
Do not tuck in the blanket as this may cause over heating and/or fire.
19.
The blanket can be used only with the control unit provided by the manufacturer. Any other
control unit may cause overheating and/or fire.
20.
Do not unplug the product by the power cord while in use. Always turn the power off at the
power outlet before you remove the plug. Remove by grasping the plug; do not pull on the
cord.
IMPORTANT INSTRUCTIONS
– RETAIN FOR FUTURE USE.
