Assembly
This fan is supplied with the base pre-assembled.
DO NOT operate the fan with the base surround removed.
To assemble to fan and grille
•
Place the Rear Grille onto the Motor Housing Top and align the Locating Pegs.
NOTE: The small screw hole should be at the bottom of the fan
•
Next place the Grille Retaining Ring onto the Motor Housing Top and turn to tighten and
secure.
•
Slide the Fan Blade over the motor shaft ensuring that it is firmly seated.
•
With the help of another person, position the front guard against the rear grill and push the
guard ring in place so that it holds both guards together and the screw is at the bottom.
Secure by tightening screw.
