WATER DRAINAGE
When the water container is full:
- An alarm signal will be produced.
- The compressor will stop automatically, this will also stop the dehumidification process.
-Empty the water container and replace it in the correct position, the dehumidifier will continue
dehumidifying when the compressor, automatically, starts after three minutes. If desired, it is possible to
connect a drainage tube (not supplied) to the device for permanent water drainage. If this option is desired
you will need to purchase a suitable tube from your local hardware retailer (Goldair does not hold tubes as
spare parts). Connect the drainage hose to the drain spout and ensure that the end of the hose is lower than
the drain opening, otherwise the water will not drain and flooding may occur. Also ensure the water tank is
in position (in the unit) otherwise the continuous drainage will not operate. Place the end of the drainage
hose in a drainage outlet. When you no longer wish to use the permanent water drainage, disconnect the
drainage tube from the device. Ensure that the water container is positioned correctly.
CLEANING
Switch the dehumidifier off and remove the plug from the socket before cleaning.
THE EXTERIOR
Clean the exterior with a soft, dry cloth. If the device is extremely dirty, use a mild cleaning agent. Wipe the
device with a slightly damp cloth. Never spray the device with water.
THE AIR FILTER
When used regularly, the filter may become clogged with dust and particles. Therefore the filter should be
cleaned every two weeks. Follow these steps:
1 Remove the filter.
2 Clean the filter with a vacuum cleaner or with water. Dry the filter and replace it. Ensure that the filter is
completely dry.
Operating Instructions Continued