Components
ASSEMBLY
Before
using
the
heater,
the
feet
(supplied
separately in the carton), must be fitted to the unit.
The screw pack to attach the feet to your heater will
be taped to either one of the feet for your heater, or
taped to the plug.
Carefully turn the Main Body upside-down on a scratch-
free and stable surface. Be careful to prevent damage
to the cosmetic finish or your floor surfacing.
Each foot requires two screws to attach them securely
to the heater. Two holes are pre-drilled in each foot and
in the base of the heater. Align the feet with the holes,
insert the screws and use a screwdriver to secure the
feet to the base of the heater. Return to upright position.
Feet x2
Screws x4
Main Body x1
WARNING:
Operate the heater in the normal
upright position only with the feet attached to the
bottom.
Any other position could create a
hazardous situation.
