![background image](http://html1.mh-extra.com/html/goldair/gctp120/gctp120_operating-instructions-manual_2240063005.webp)
Components
The tripod base comes assembled with the
three legs. The fan head is fully assembled
with the fan head holder. To assemble the two
parts, proceed as follows:
Step 1 Remove the decorative cover (K) from
the tripod base (M), just pull it off the base.
Step 2 Remove the bolt (L) and nut (N).
Step 3 Place the fan head assembly on top of
the tripod base (M).
Step 4 Insert the bolt (L) through the hole in
the fan head holder (J) into the hole of the top
of the tripod base (M) and tighten it securely
with the nut (N).
Step 5 Reattach the decorative cover (K).
Your tripod fan is now fully assembled.
Parts of the fan
A Front fan guard
B Fan blades
C Holder shaft
D Fan housing
E Motor
F Motor cover
G Rear fan guard
H Switch panel
I Power cord and plug
J Fan head holder
K Decorative cover
L Bolt
M Tripod base
N Nut
Assembly
Summary of Contents for GCTP120
Page 1: ...Operating Instructions 20cmTripodFan Item GCTP120 ...
Page 2: ......