OPERATION:
Plug into power supply, 2 beep signals will be
heard
.
ON/SPEED:
To turn the unit on press On/Speed button. A
backlight will illuminate on the display panel, the
unit will operate in Medium speed and then shift to
Low after 3 seconds.
To switch between Low, Medium, or High wind
speeds, press the Speed button.
The display panel will indicate the working speed of
unit by illuminating the corresponding backlight.
Press the Off button and the unit will turn off.
REMOTE CONTROL INSTRUCTIONS:
The remote control buttons perform the same
functions as those on the control panel of the unit.
For best results, aim the remote directly at the
remote sensor on the front panel of the Fan. The
remote has a 3metre range of operation.
The remote control requires 1x 3V CR2032 battery.
Replace battery when required by opening the
battery compartment on the back of controller.
Pull out the battery compartment.
Replace with new battery taking note to match the
Plus (+) and Minus (-) from the battery to the
controller.
The remote will restart when pushed
back into the compartment.
Operating your Fan
PRE-PROGRAMMED SETTINGS
The unit has 3 pre-programmed settings which can
be selected.
To switch between the pre-programmed settings,
press the Mode button.
The display panel will indicate the working setting
of unit by illuminating the corresponding backlight.
The settings are:
Normal
:
The unit runs at a constant speed
according to the wind speed that has been set as
per above.
Natural:
The wind speed shifts between Low,
Medium, High in soft patterns.
When the unit is set in High wind speed the Natural
setting will cycle the unit through Low, Medium,
High speed patterns of 90 seconds.
When the unit is set in Medium wind speed the
Natural setting will cycle the unit through Low,
Medium speed patterns of 90 seconds with brief
High speed.
When the unit is set in Low wind speed the Natural
setting will cycle the unit through Low, Medium
speed patterns of 90 seconds.
Sleeping:
The wind speeds shift in a step down
progression.
When the unit is set in High wind speed the
Sleeping setting will cycle the unit through High,
Medium speed patterns of 30 minutes then remain
on Low speed for the remainder of the program.
When the unit is set in Medium wind speed the
Sleeping setting will cycle the unit through Medium
speed for 30 minutes then remain on Low speed
for the remainder of the program.
When the unit is set in Low wind speed the
Sleeping setting will remain on Low speed for the
remainder of the program
These
pre-programmed
settings
cannot
be
modified.
MEMORY FUNCTION
If power supply is cut off when the appliance is
running, it will automatically restart in the last
working mode once power is restored
