Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
Operating your Fan
ON/SPEED
Plug into power supply and switch on at the mains.
To turn the unit on press power button.
To switch between Low, Medium, or High wind
speeds, press the Speed button, the control panel
will
indicate
the
working
speed
of
unit
by
illuminating the corresponding backlight.
Press the power button again to turn the unit off.
TIMER
The fan has an automatic timer to turn the unit OFF
at intervals of 1-12 hours. To set the timer, turn the
unit on at the required speed, press the timer
button until the desired run time is illuminated on
the control panel.
The fan will turn off once the time has expired.
OSCILLATION
The oscillation feature can be activated by pressing
the OSC button. The fan can be set to a stationary
position by pressing the button again.
CARE AND CLEANING
The Fan requires regular cleaning to ensure trouble
free operation:
Unplug the Fan from the mains supply before
cleaning.
Ensure that the Fan blade has been allowed to
stop down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of
the Fan to remove dust and dirt.
Use a vacuum cleaner to remove dust and fluff
from around the grills.
Never use solutions such as benzene, thinners or
polishing agents.
Ensure the Fan is dry before plugging back into the
mains supply.
Do not attempt to dismantle the Fan. There are no
user serviceable parts. For service or repair,
contact an authorised electrical service technician.
PRE-PROGRAMMED SETTINGS
The unit has 3 pre-programmed settings which can
be selected.
To switch between the pre-programmed settings,
press the Mode button.
The display panel will indicate the working setting
of unit by illuminating the corresponding backlight.
The settings are Normal, Natural, Sleeping:
Normal
:
The unit runs at a constant speed
according to the wind speed that has been set.
Natural:
The wind speed shifts between Low,
Medium, High in soft patterns.
When the unit is set in High wind speed the Natural
setting will cycle the unit through Low, Medium,
High speed patterns.
When the unit is set in Medium wind speed the
Natural setting will cycle the unit through Low,
Medium speed patterns with brief High speed.
When the unit is set in Low wind speed the Natural
setting will cycle the unit through Low, Medium
speed patterns.
Sleep:
The wind speeds shift in a step down
progression.
When the unit is set in High wind speed the
Sleeping setting will cycle the unit through High,
Medium speed patterns of 30 minutes then remain
on Low speed for the remainder of the program.
When the unit is set in Medium wind speed the
Sleeping setting will cycle the unit through Medium
speed for 30 minutes then remain on Low speed
for the remainder of the program.
When the unit is set in Low wind speed the
Sleeping setting will remain on Low speed for the
remainder of the program
These
pre-programmed
settings
cannot
be
modified.
