WARNING Keep all objects at least 1
metre from the front, sides and rear of
the appliance
Fan control switch
Place the fan on a dry, level and sturdy
surface.
Plug the power cord into the socket.
Switch on the appliance by pressing the
on/off button (A) on the control panel. The
fan will begin to operate in low fan speed.
The low speed indicator (1) will illuminate.
Switch fan off by pressing on/off button (A).
Fan Speed
Each press of the speed button will change
the wind speed between High-Mid-Low. The
corresponding fan speed light will illuminate.
Timer
The timer function allows the unit to be set
to operate for a length of time from 0.5-7.5
hours before switching the unit off.
Each press of the timer button (C) will
increase the amount of time the unit runs
before it switches off.
The corresponding
timer lights will illuminate.
If you want to use the fan without setting the
timer, adjust the timer so that no lights timer
indicators (3) are illuminated.
Always choose a safe location for the fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This
appliance requires no installation, it should be used solely as a portable
appliance.
Operating your Fan
Oscillation
To activate the oscillation function, push
down the oscillation button on the control
panel. The fan will then oscillate until the
button is pushed again to turn off.
Mode
There are 3 Mode functions:
Normal,
Natural or Sleep.
Normal Mode: Constant air flow which can
be adjust by pressing the speed function
button.
For example, normal LOW or
normal MEDIUM or normal HIGH.
Natural Mode: Programmed to simulated
natural air flow (wind) as if it was entering
via the window. Natural mode can be
operated in high, medium or low speed.
Sleep
Mode:
Programmed
to
provide
comfort while the user is asleep.
This mode is similar to the natural mode and
can operate with speed mode HIGH or
MEDIUM or LOW.
Pressing the mode button (E) on the remote
control will select the wind mode, i.e.
natural, sleep or normal. The mode will be
indicated on the display panel (2).
Tilt
Adjust tilt by turning neck screw (9) and
tilting body to the desired wind direction (i.e.
either upward or downward).
