Operating your Fan
TIMER:
The Timer function allows the Fan to operate
continuously
from
0.5
– 7.5 hours
before
automatically turning Off. The Timer can be
operated in any mode.
Press the TIMER Button on the control panel (or
remote) once and the Fan will display 0.5 hours.
By pressing the TIME Button again you can adjust
the desired length of time in increments.
The corresponding length of time will illuminate on
the control panel displaying your selected time.
For example: If the Timer is programmed to
operate for 3 hours, the 2 hour and 1 hour light will
be illuminated.
To stop the Timer function, press TIMER button
until time indicators are OFF.
COLOUR LIGHT
The colour light featured at the top of the control
panel can be turned on or off by pressing the
Colour Light button.
SWING
:
When unit is powered on, press the SWING button
to oscillate the fan. Press again to fix a stationary
angle.
To set to desired wind direction, support the stand
pipe, hold the motor housing of the fan, and adjust
the fan vertically upwards or downwards until a
desired angle is reached.
CARE AND CLEANING
The Fan requires regular cleaning to ensure trouble
free operation:
Unplug the Fan from the mains supply before
cleaning.
Ensure that the Fan blade has been allowed to
stop down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of
the Fan to remove dust and dirt.
Use a vacuum cleaner to remove dust and fluff
from around the grills.
Never use solutions such as benzene, thinners or
polishing agents.
Ensure the Fan is dry before plugging back into the
mains supply.
Do not attempt to dismantle the Fan. There are no
user serviceable parts. For service or repair,
contact an authorised electrical service technician.
Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
