Operating your Fan
ON/SPEED:
Plug into power supply and switch on at the mains.
To turn the unit on press On/Speed button.
To switch between Low, Medium, or High wind
speeds, press the On/Speed button again, the
control panel will indicate the working speed of unit
by illuminating the corresponding backlight.
Press the Stop button and the unit will turn off.
REMOTE CONTROL INSTRUCTIONS:
The remote control buttons perform the same
functions as those on the control panel of the unit.
For best results, aim the remote directly at the
remote sensor on the front panel of the Fan. The
remote has a 6metre range of operation.
Replace battery when required by opening the
battery compartment on the back of controller.
Pull out the battery compartment as shown below.
Replace with new battery taking note to match the
Plus (+) and Minus (-) from the battery to the
controller.
The remote will restart when pushed
back into the compartment.
PRE-PROGRAMMED SETTINGS
The unit has 3 pre-programmed settings which can
be selected.
To switch between the pre-programmed settings,
press the Mode button.
The display panel will indicate the working setting
of unit by illuminating the corresponding backlight.
The settings are Normal, Natural, Sleeping:
Normal
:
The unit runs at a constant speed
according to the wind speed that has been set.
Natural:
The wind speed shifts between Low,
Medium, High in soft patterns.
When the unit is set in High wind speed the Natural
setting will cycle the unit through Low, Medium,
High speed patterns.
When the unit is set in Medium wind speed the
Natural setting will cycle the unit through Low,
Medium speed patterns with brief High speed.
When the unit is set in Low wind speed the Natural
setting will cycle the unit through Low, Medium
speed patterns.
Sleep:
The wind speeds shift in a step down
progression.
When the unit is set in High wind speed the sleep
setting will cycle the unit through High, Medium
speed patterns of 30 minutes then remain on Low
speed for the remainder of the program.
When the unit is set in Medium wind speed the
sleep setting will cycle the unit through Medium
speed for 30 minutes then remain on Low speed
for the remainder of the program.
When the unit is set in Low wind speed the sleep
setting will remain on Low speed for the remainder
of the program
These
pre-programmed
settings
cannot
be
modified.
