![background image](http://html1.mh-extra.com/html/goldair/gcpf190/gcpf190_operating-instructions-manual_2240037006.webp)
WARNING:
The fan should not be connected to the power mains during
assembly
Assembly
A
Direction of rotation
B
Height adjustment lock
C
Base cover
D
Outer stand pole
E
4 screws
F
Base Feet
G
Caps
•
Assembly the cross feet (F) across and place the stand
outer pipe (D) upon the feet and fix it with the 4
screws provided.
•
Loosen and remove stand pipe knob (B) and pull the
base cover (C) over the stand outer pipe (D).
•
Let the base cover (C) slide over the mounted feet.
•
If the caps from the feet are not mounted, please
attach them.
•
Pull the inner pipe till the end out of the stand outer
pipe (D) and slide the stand pipe knob (B) over the
inner pipe onto lower metal pipe and tighten.
•
Loosen stand pipe knob (17). Then adjust the pipe to
the desired height and then re-tighten the adjustment
knob.
•
Loosen the fan body fixing knob (14) by turning into
the left.
•
Place the switch box into the stand inner pipe (15).
•
Turn the fan body fixed knob (14) clockwise and
tighten firmly.
•
Fix the back guard (6) onto the motor shaft (8) till to
the motor front cover (7) ,Then screw the guard lock
(5) tighten in clockwise direction.
•
Insert the Blade (4) onto the Motor shaft (8).
•
Tighten the Blade with the Blade spinner (3) firmly in
clockwise direction.
•
Mount front guard (2) onto the back guard (6) with the
locking screw. Fix both grilles with the clips spread
onto the edge of the guard equably, then use a
screwdriver to tighten the locking screw firmly.
Summary of Contents for GCPF190
Page 1: ...Operating Instructions 40cm Pedestal Fan with Remote Model GCPF190 ...
Page 2: ......
Page 11: ......