![background image](http://html1.mh-extra.com/html/goldair/gcmf220/gcmf220_operating-instructions-manual_2240027009.webp)
Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
Cleaning and Maintenance
Please clean the photocatalyst every
month.
Cleaning the photocatalyst :
Remove the 4 screws
①
on the bottom box
holding this item.
Take off the photocatalyst housing
②
.
Remove photocatalyst
③
.
Clean the dust from the photocatalyst, and
wipe the holder.
Re-install all these parts in reverse order.
Please clean the unit body as required.
Clean the unit body:
Wipe the machine with soft wet cloth. Use
a mild neutral detergent for stubborn
stains.
DO NOT use any corrosive cleaners such
as gas or alcohol to clean the plastic parts
of the machine. Put the machine into the
box and keep it in a dry with good air
circulation place.
To avoid risk of electric shock, before
cleaning, you MUST ALWAYS switch off
and unplug the Fan before cleaning.
Use only a soft, damp cloth to gently wipe
the Fan and dry well.
DO NOT immerse the Fan in water and
never allow water to enter the motor
housing.
DO NOT use harsh chemicals to clean the
Fan.
Storage:
When not in use put the machine into the
box and store it in a dry place with good air
circulation.