Assembling your Fan
ASSEMBLING YOUR FAN
Your Misting Fan has been boxed unassembled to
minimise packaging waste. Each part is designed
to fit together and be disassembled easily for
cleaning or storage.
Assemble the Base (4) to the Stand Tubes (1)
using the screws (3), plate (5) and nuts (6)
provided.
Slide the base cover (2) down the stand tubes (1)
so that it covers the base.
Always choose a safe location for the Fan, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. This appliance requires no installation, it should be used solely as
a portable appliance.
Assemble the fan body to the Stand Tubes using
the 2x screws provided
Attach the Humidifier base to the Fan base using
the screw provided
To assemble the safety grill and blade, remove the
Spinner by turning it clockwise.
Place the rear safety grill into position. Ensure the
safety grill fits onto the locating lugs. If this is done
correctly the safety
grill’s carry handle will be at the
top.
Fix the safety grill into position by replacing the
Locking Nut tightly by hand
NOTE: Do not force or over tighten the Locking
Nut