Assembly
Unscrew the base locking screw and ring
from the stand pole and insert the stand pole
through the hole in the centre of the base.
Tighten the base and stand pole by twisting
into position.
Turn the Base upside down with the pole
facing the floor then place the Base Weight
Support at the bottom of the Stand Base.
Components
Operating your Fan
Tighten the Base Weight Support to the
Stand Base with the Ring and Base Locking
Screw.
Unscrew the Locking Nut from the Fan Head.
Put the Fan Head into the Pole, and using the
Clamp Screw, tighten the Fan Head and the
Pole.
