![background image](http://html1.mh-extra.com/html/goldair/gcdf30t/gcdf30t_operating-instructions_2240014003.webp)
Put the round base on flat ground
Fix the bottom of the fan body to the round
base, and then fix it by screws (in a small
poly bag to the inside of the round base) .
Do not over-tighten these screws.
Take off guard lock nut (4) from motor shaft.
Place the rear guard (5) on the front of the
motor housing. Line up the lugs on the front
of the motor housing with the holes in the
rear guard. Screw on guard lock nut tightly to
attach rear guard.
Place the fan blade (3) on the motor shaft
and secure it by tightening the fan blade nut
(2).
Fit the front guard (1) onto the rear guard (5)
and close the clips, then secure the grill with
the small screw provided.
Assembly
1. Front guard
2. Front blade nut
3. Fan blade
4. Guard mounting nut
5. Rear guard
6. Motor spindle
7. Oscillation knob
8. Base
9. Speed control switch
10. Screws
Components