background image

WARNINGS AND SAFEGUARDS

To obtain maximum benefit from your Goldair appliance please read the instruction manual carefully and
ensure this is understood before using the product.

1.

Use only the voltage specified on the rating plate of the appliance.

2.

Keep all objects at least 1 metre from the front, sides and rear of the appliance.

3.

Do not place appliance close to radiant heat source.

4.

Do not operate in areas where petrol, paint or other flammable liquids are used or stored.

5.

Do not use the appliance to dry clothes.

6.

Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may
cause an electric shock, fire or damage to the appliance.

7.

Do not operate this appliance with a damaged cord, plug or after the appliance malfunctions
or has been dropped or damaged in any manner. Return to a qualified electrical person for
examination, electrical service or repair.

8.

This appliance is intended for household use only and not for commercial or industrial use.

9.

Use this appliance only as described in this manual. Any other use is not recommended by the
manufacturer and may cause fire, electric shock or injury.

10.

The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these
deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents
and grills.

11.

Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet)
rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.

12.

Do not connect the appliance to mains voltage until completely assembled and adjusted.

13.

Switch off and use handles provided when moving.

14.

Do not operate with cord set coiled up as a heat build up is likely, which could be sufficient to
become a hazard.

15.

The use of an extension cord with this appliance is not recommended.

16.

Do not remove plug from power socket until the appliance has been switched off.

17.

Do not remove plug from power socket by pulling cord – always grip plug.

18.

Always unplug appliance when not in use.

19.

Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to
weaken and split. Always ensure that all cord has been removed from any cord storage area
and is unrolled before use.

20.

This appliance is not intended for use by young children or infirm persons unless they have
been adequately supervised by a responsible person to ensure that they can use the appliance
safely.

21.

Do not use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool
or other liquids. The appliance must not be immersed in any liquids.

22.

When the appliance has been unpacked, check if for transport damage and ensure all parts
have been delivered. If parts are missing of the appliance has been damaged, contact the
Goldair Customer Services Team. (refer to details on back page)

23.

If your appliance does not work, or is not working properly, contact the place of purchase of
the Goldair Customer Services Team. (refer to details on back page). Repair work on the
appliance by unqualified persons can cause serious risk to the user.

Summary of Contents for GCDF125







Reviews: