![background image](http://html1.mh-extra.com/html/goldair/gccf120/gccf120_operating-instructions-manual_2239990009.webp)
Carefully lift the fan assembly onto the hanging bracket. Rotate fan until the notch on down rod
ball (1) engages the ridge in the hanging bracket (2). This will allow for hands free wiring. With
the hanging bracket holding the fan assembly, make sure the connector is properly in place.
Wires connections on the terminal Brown wire --- L; Blue wire --- N; Green/Yellow ---
Installing your Fan
Make sure the electrical connector is properly in place.
Tighten Screws here.
Hanging bracket holding the fan assembly
Tighten the lower canopy set screws. Ensure that they are tightened against the down rod to ensure
good electrical and mechanical fixing of the lower canopy to the down rod.
Fit the controller. The controller will fit standard wall plate mountings. Wire the controller in
accordance with the wiring diagram. Fit to wall. Fit screw caps.
Check all wiring, switch power on at switchboard,
check operation.