Heat Control
Ensure the heater has power available by turning it on at the isolating switch. Pull the pull-cord to
start the heater. The heater has 3 heat settings as follows:
1
– 500W
2
– 1000W
3
– 1500W
The heater requires regular cleaning to ensure trouble free operation:
• Turn the isolating switch off. For added protection, also turn the mains supply off.
• Use a vacuum cleaner to remove dust and fluff from the inlet and outlet grills. Be careful not to
touch elements
• Use a cloth with a stainless steel cleaner to clean the exterior of the heater. Do not use abrasive
cleaning products on this appliance
• Ensure the heater is dry before turning the power supply back on to the heater.
Do not attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will
void the warranty. Contact a qualified electrical person to service the heater.
OPERATING INSTRUCTIONS
CLEANING
SERVICE INSTRUCTIONS
SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday
– Friday 8am-5pm
Phone: 0800 232 633
Website: www.goldair.co.nz
