background image

Never use plastic or glass utensils on the BBQ 

Never use the BBQ in strong winds 

Before you start cooking for the first time, clean the BBQ thoroughly with hot soapy 
water. This is necessary to remove residuals and solvents, oil and grease, which may 

have  remained  from  the  manufacturing  process.  The  hotplate  and  grill  should  be 

thoroughly cleaned in the same manner.  

 

Operating your BBQ 

Page 13 

Charcoal 

Charcoal goes on the coal rack and fire lighter blocks like 

“little lucifer’s” can be used to 

assist  with  lighting  the  coals.  A  long  match  should  be  used  to  light  the  coal  from  the 
bottom on at least two sides. 
Charcoal  takes  about  10  to  15  minutes  to  reach  the  proper  temperature,  when  the 
charcoal is ready for grilling it will have an ashy coating all around, appear white or gray, 
and be very hot.  Charcoal can then be spread to build your fire. 
 
For a medium heat spread your charcoal in a single layer on the coal grate. 
For a high heat create a double layer of coals on the coal grate. 
 
Charcoal,  fire  lighter  blocks,  and  long  matches  can  be  purchased  separately  from  your 
local BBQ retailer. 
 

Before first use - Curing the cast iron 

During  manufacturing,  the  cooking  surfaces  (plates  and  grills)  were  coated  with  a  non-

toxic  paint.  This  paint  will  come  off  completely  over  time.  Its  purpose  is  to  help  protect 

your  BBQ  during  transport  and  storage.    Coat  the  top  of  the  hotplates  and  grills  with 
canola oil or something similar.  

Now clean the surfaces with water and a brush. 

Be careful of steam coming off the cast iron surface while doing this. The hotplates and 
grills are now cured and ready for use.  This process only needs to be done the first time 
you use the BBQ. 

Controlling flare up 

Flare-ups  are  sudden  bursts  of  flame  that  come  up  over  the  top  of  the  grill.  They  are 
caused by natural cooking juices from your food falling onto the flames and then burning. 

A  little  bit  of  flare-up,  as  well  as  the  resulting  smoke,  is  a  good  thing, 

It’s  what  gives 

BBQ’d  food  that  unique  outdoor  flavour.  But  if  it  happens  too  often,  or  if  the  flame last 
more than a couple of seconds, your food will char, so you need to control it. 

First of all, cooking very fatty foods will cause a lot of flare up. You should trim excess fat 
off your meat.  

 

Summary of Contents for GBQC210



















Reviews: