Step 16.
The BBQ is intended to be used with a standard 9kg LPG cylinder. This is the type of cylinder that
can be refilled at petrol station or swapped for similar cylinder.
Place the cylinder in position under the left hand side burner, so that the cylinder sits level on the
ground. Take the hose that came with the BBQ, check that it has a rubber seal on the regulator end
of the hose and connect this end to the gas cylinder, ensuring that the hose is not twisted. You
won’t need a spanner here. Just turn the fitting in an anti clockwise direction and hand tighten as
much as you can. This should seal it sufficiently.
It is important to conduct a leak test prior to use. Follow leak test procedure. (Procedure
located on Page 2 of this manual)
Assembly Procedure
Step 15.
Install Grill Plates, Warming Rack, and Side burner Trivet
Important: Check the hose is routed as per drawing above. The hose must not be kinked.
Page 19
