![background image](http://html.mh-extra.com/html/goldair/fsb400/fsb400_operating-instructions-manual_2239868007.webp)
Operating Food Processor & Mini Chopper
FOOD PROCESSOR UNIT
1.
Place drive shaft on centre pin of
processor bowl.
2.
If you wish to chop, place ‘S’ blade
over drive shaft, ensuring it is pushed
right down. TAKE CARE AS BLADE
IS VERY SHARP.
3.
If you wish to slice/grate, ensure
blade carrier disc is fitted with desired
blade. Use the finger holes in the
blade carrier disc to insert/remove it
into food processor bowl. This will help
to protect your fingers from sharp
parts.
4.
If using the ‘S’ blade, you can place
food in bowl after inserting the ‘S’
blade or you can add food through
feeder tube.
5.
DO NOT exceed maximum marking
on bowl.
6.
Place lid on bowl and turn in an anti
clockwise direction, sing arrows on lid
and marking on bowl handle to line up
and lock lid into positon.
7.
Place motor unit onto lid, ensuring
arrows are lined up and that it clicks
securely into place.
8.
Plug in and turn on. Start on low
speed and progress to higher speed.
9.
If using grating/slicing discs, use the
food pusher to push food down feeder
tube onto the disc. Always push
gently. DO NOT force food against the
blades.
10. When you have finished processing,
remove motor unit by pressing release
button and remove lid by turning it
clockwise.
11. Carefully remove blade from bowl
before removing ingredients from
bowl.
12. To remove blade from drive shaft, grip
collar of blade and push down on top
of drive to release. Take care as blade
is very sharp.
DO NOT use ‘S’ blades and blade carrier
disc/slicing/grating attachments at the
same time. This will create excessive
wear on parts.
WARNINGS
THE BLADES AND DISCS ARE SHARP.
ALWAYS HOLD BY THE PLASTIC PART
AND TAKE GREAT CARE NOT TO
TOUCH BLADE.
WHEN FEEDING INGREDIENTS DOWN
FEEDER TUBE, ALWAYS USE PUSHER
TUBE. DO NOT PUT YOUR FINGERS OR
ANY UTENSILS DOWN THE FEEDER
TUBE.
MAXIMUM OPERATING TIME IS 1
MINUTE.
A MINIMUM OF 2 MINUTES REST
SHOULD BE OBSERVED BETWEEN 1
MINUTE OPERATING CYCLES.
ALWAYS ENSURE POWER CORD IS
UNPLUGGED FROM POWER OUTLET
BEFORE ADDING OR REMOVING ANY
ATTACHMENTS.
DO NOT CHOP EXTREMELY HARD
ITEMS SUCH AS NUTMEG, COFFEE
BEANS, ETC
TIPS
Allow food to cool before adding to
processor bowl.
DO NOT exceed maximum mark on bowl
Food will process more quickly and more
evenly if roughly chopped to 2cm pieces
before placing in bowl.
You can PULSE by pushing / releasing
On/Off switch. This gives maximum control
for desired consistency.
NOTE
Grater/slicer is not appropriate for, and
will not work well on, “sticky” foods
such as soft cheese, almonds etc.
Using grater/slice for foods such as
these can create excessive wear on
parts.