![background image](http://html1.mh-extra.com/html/goldair/ffp200/ffp200_operating-instructions-manual_2240087005.webp)
•
CHOPPING
•
Lock he bowl onto the base as described in assembly
•
Place the chopping blade onto the center post (see Fig.4)
•
CAUTION: Blades are sharp, handle carefully.
•
Place food to be chopped into bowl, refer to food guide to prepare food for chopping
•
Lock bowl cover assembly onto bowl. As described in assembly
•
The food processor should be in the OFF position. Plug the cord into an electric
outlet.
•
Turn the knob to ON to run constantly, or for better control over consistency, turn
and hold knob on PULSE.
•
When finished processing:
•
If pulsing, release control knob and unit automatically stops
•
If you turned processor to ON, turn control knob to OFF to stop
•
Allow the chopping blade to stop rotating
•
NOTE: Before opening the bowl cover, turn the unit OFF and unplug the cord.
•
To remove bowl cover, unlock by turning counterclockwise until cover unlatches,
and lift off.
•
Lift the chopping blade by its base and remove, unlock the bowl by turning it
counterclockwise, and lift off. Empty the processed food.
•
•
WARNING: Chopping blade is very sharp, use caution when handling.
•
TO SLICE OR SHIRED
•
CAUTION: Make sure control knob id turned to OFF and unit is unplugged before
use. Never use your hand to push food into processor. The use of heavy pressure
will not speed operation.
•
Lock the bowl onto the base as described in assembly.
•
Slide the disc stem down onto the center post of the base, then place the
slice/shred disc. With the desired side facing up for either slicing or shredding, onto
the disc stem and push down. At this point the disc will be at the top of the bowl.