OVERVIEW OF GOLDAIR CONVECTOR HEATER
Your Goldair Convector Heater is equipped with three heat settings and a thermostat to ensure your
precise heating needs are met. In addition the heater has a fan boost option which assists with circulating
warm air through your room.
OPERATING YOUR HEATER
Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all
packaging has been removed form the unit before use. This appliance requires no installation, it should be
used solely as a portable appliance.
Before operation place the product on a flat, stable, heat-resistant surface. Plug the power cord into a
standard 230/240 volt AC electrical outlet.
•For LOW heat press the I heat switch
•For MEDIUM heat press the II heat switch
•For HIGH heat press the I and II heat switches.
•To turn the heater OFF position the mode switch to (0).
THERMOSTAT
Turn the thermostat knob until the maximum temperature is obtained on the graduated scale. When the
desired room temperature is reached, slowly turn the knob anti-clockwise until the heater turns off (you will
hear a click). The temperature will now remain constant, regulated by the thermostat.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday
– Friday 8am-5pm
Phone: 0800 232 633
Website: www.goldair.co.nz
IMPORTANT! ~ NEVER COVER THIS HEATER!
ASSEMBLING YOUR HEATER
Fit the feet to the bottom of the heater by placing the lugs on the feet in the locating holes on the base of
the heater and securing with the screws provided. Note the screws are in a bag connected to the plug.
