background image

General Care and Safety Guide 

1. Use  only  the  voltage  specified  on  the  rating  plate 

of the appliance. 

2. Keep  all  objects  at  least  1  metre  from  the  front, 

sides  and  rear  of  the  appliance.    Do  not  place 
appliance close to radiant heat source. 

3. Do  not  operate  in  areas  where  petrol,  paint  or 

other flammable liquids are used or stored. 

4. Do not insert or allow foreign objects to enter any 

ventilation or exhaust opening, as this may cause 
an electric shock, fire or damage to the appliance. 

5. Do  not  operate  this  appliance  with  a  damaged 

cord,  plug  or  after  the  appliance  malfunctions  or 
has  been  dropped  or  damaged  in  any  manner. 
Return  to  a  qualified  electrical  person  for 
examination, electrical service or repair. 

6. This appliance is intended for household use only 

and not for commercial or industrial use. 

7. Use  this  appliance  only  as  described  in  this 

manual. Any other use is not recommended by the 
manufacturer and may cause fire, electrical shock 
or injury. 

8. The  common  cause  of  overheating  is  deposits  of 

dust  or  fluff  in  and  around  the  Panel  Heater. 
Ensure these deposits are removed by unplugging 
the  appliance  and  vacuum  cleaning  behind  the 
unit. 

9. Do  not  use  abrasive  cleaning  products  on  this 

appliance.  Clean  with  a  dry  or  damp  cloth  (not 
wet)  rinsed  in  hot  soapy  water  only.  Always 
remove  plug  from  the  mains  supply  before 
cleaning. 

10. Do  not  connect  the  appliance  to  mains  voltage 

until completely assembled and adjusted. 

11. Switch off when moving. 

12. Do  not  operate  with  cord  set  coiled  up  as  a  heat 

build  up  is  likely,  which  could  be  sufficient  to 
become a hazard. 

13. The  use  of  an  extension  cord,  power  board,  or 

external timer is not recommended with this Panel 
Heater. 

14. Do  not  remove  plug  from  power  socket  until  the 

appliance has been switched off. 

 

 

15.

Do  not  remove  plug  from  power  socket  by  pulling 
cord 

– always grip plug.  

16.

Always unplug appliance when not in use. 

17.

The heater must not be located immediately below 
a socket outlet. 

18.

Do  not  twist,  kink  or  wrap  the  cord  around  the 
appliance,  as  this  may  cause  the  insulation  to 
weaken  and  split. Always  ensure  that  all  cord  has 
been  removed  from  any  cord  storage  area  and  is 
unrolled before use. 

19.

This  appliance  is  not  intended  for  use  by  persons 
(including children) with reduced physical, sensory 
or  mental  capabilities,  or  lack  of  experience  or 
knowledge,  unless  they  have  been  given 
supervision  or  instruction  concerning  use  of  the 
appliance by a person responsible for their safety. 

20.

Do  not  use  this  appliance  in  the  immediate 
surrounds of a bath, a shower, or a swimming pool 
or  other  liquids.  The  appliance  must  not  be 
immersed in any liquids. 

21.

When  the  appliance  has  been  unpacked,  check  if 
for  transport  damage  and  ensure  all  parts  have 
been  delivered.  If  parts  are  missing  or  the 
appliance  has  been  damaged,  contact  the  Goldair 
Customer Services Team.  

22.

If  your  appliance  does  not  work,  or  is  not  working 
properly,  contact  the  place  of  purchase  or  the 
Goldair  Customer  Services Team.  Repair  work  on 
the  appliance  by  unqualified  persons  can  cause 
serious risk to the user. 

23.

There are no user serviceable parts installed in the 
unit. 

24.

Do not put your fingers or other articles into or near 
the air inlet or outlet. Do not sit on the unit. 

25.

Do  not  place  the  unit  in  wardrobes  or  other 
enclosed spaces as this may cause fire hazards. 

26.

This  unit  is  not  supposed  to  be  used  in  or  around 
locations where foodstuffs, works of art or delicate 
articles of science, etc are stored. 

27.

Indoor use only. 

28.

Children should  be supervised to ensure that they 
do not play with the appliance. 

29.

WARNING: to avoid overheating, do not cover this 
heater. 
 

Thank you for choosing a ecosave Panel Heater. This ecosave heater has 
been  designed  and  manufactured  to  high  standards  of  engineering  and 
with proper use and care, as described in this leaflet,  will give you years 
of useful service. Please read these instructions carefully. 

TECHNICAL SPECIFICATION 

Model No: GECO203 
Power Supply: 220-240V, 50Hz AC only 
Power: 425W 

Summary of Contents for Ecosave GECO203







Reviews: