Assembly Procedure
Step 11.
The BBQ is intended to be used with a standard 9kg LPG cylinder. This is the type of cylinder that
can be refilled at petrol station or swapped for similar cylinder.
Place the cylinder in position under the right hand side table, so that the gas bottle is on the outside
of the BBQ
Take the hose that came with the BBQ, check that it has a rubber seal on the regulator end of the
hose and connect this end to the gas cylinder, ensuring that the hose is not twisted. You
won’t need
a spanner here. Just turn the fitting in an anti clockwise direction and hand tighten as much as you
can. This should seal it sufficiently.
It is important to conduct a leak test prior to use. Follow leak test procedure.
(
Procedure
located on Page 2 of this manual)
Important: The hose must not be kinked.
Page 21
Summary of Contents for Connoisseur GBQA340
