Operating Your Heater
WARNING:
In order to avoid overheating or fire,
DO NOT COVER
the heater.
WARNING:
Do not use this heater with a programmer, separate timer, remote-
control system or any other device that switches the heater on automatically, as a
fire risk exists if the heater is covered or positioned incorrectly.
WARNING:
Never leave this heater unattended when in use.
NOTE:
When the appliance is turned on for the first time, it may release a slight
odour or smoke. This odour or smoke is a normal occurrence caused by the initial
heating of the internal heating elements and should not occur again.
IMPORTANT NOTE:
Goldair bathroom heaters have 3 operating modes:
Heat Control
–
Hot Air
–
2400W
Ensure the heater has power available by turning it on at the isolating switch. Pull the pull-
cord to start the heater. The neon indicator light will illuminate indicating the heater is in
operation. Pull the pull-cord again to turn the heater off.
Automatic Step-down Heat
–
Warm Air
–
1200W
When the room reaches a pre-set temperature, the heater will automatically step-down and
reduce the heat output to save power. If the room cools down, the heater will automatically
step-up and increase the heat output.
Overheat Protection
–
Cold Air
The heater will turn itself off in the event of over heating. The most common cause of over
heating is deposits of dust or fluff entering the appliance. Ensure these deposits are removed
regularly by cleaning the inlet and outlet grills. The heater will automatically re-set when it
has cooled down.
If the heater is blowing cold air, power it off and leave it for 1-2 hrs to allow the safety
devices to cool down and reset. Then reactivate your heater and if;
A) it blows warm or hot air, continue to use the heater.
B) it still blows cold air, then the permanent disabling
element safety device has activated. You will need to
reach out to CDB customer services team with imagery
of your installation and we will be in touch with further
instructions. Scan the QR-Code to be directed to our
contact us website page.
