6
hearing loss.
Do not wear your headphones while operating your metal detector near
high-traffic areas. Pay attention to traffic safety.
A QUICK LOOK AT THE DETECTOR
1. MODE SWITCH
DISC-The mode DISC facilitates searching for and discriminating the
target type based on the long or short tone for different metal targets.
ALL METAL- This mode is used to search for all kinds of metal objects.
2.
GND BAL-
This is used to offset the effects of any minerals present in
the soil and to balance the effects of saltwater.
3. SENS- Turn the dial control counter-clockwise all the way to get to the lowest
sensitivity. As you slowly turn the SENS dial clockwise, the sensitivity will
gradually increase. In general, you can set the SENS to the highest position,
however in mineralized areas, or in areas with electrical interference, it is
more effective to lower the SENS dial.
4. VOLUME- This dial is used to adjust the volume level. To decrease the
volume (make lower) turn the dial counter-clockwise. To increase the volume
