Gold Note B-7 Ceramic, User Manual, Page: 8 / 16

VTA SETUP
To up or down the arm by correctly adjusting the VTA, use the
1.5 mm Allen key supplied by Gold Note and insert it in the three
holes on the arm board indicated by the arrows.
Allen-key 1,5 mm
Arm board
AZIMUTH
After the cartridge has been properly installed on the tone arm,
you can adjust the angle of the headshell with the supplied 0,9
mm Allen Wrench.
Setting a correct Azimuth will provide a better audio
performance.
Allen-key 0,9 mm
VTA AND AZIMUTH
7