AP-7 back panel
o
(1) 3 pairs of RCA Analogue LINE INPUT L1, L2, L3-
Unbalanced
o
(2) 1 pair XLR Analogue LINE INPUT L4 –
Balanced
o
(3) Stereo speaker terminal binding posts
o
(4) PSU IN
– Power Supply connector (optional –not available in all countries)
o
(5) IEC PLUG with FUSE -
100 -240 Volt - 50/60Hz with 1 A fuse
Content of Packaging – Back Panel Features
AP-7
Italian 40 Watt Integrated Amplifier
(Operating Conditions)
The AP-7 has been designed for use in Hi-Fi systems in sheltered locations. It ought therefore to be
protected from any eventual variations in temperature and humidity. Avoid to use the unit close to
radiators or other strong heat sources, electrical and electronic motors, switched on mobile phones
etc. The location in proximity of other audio components is not theoretically critical, but you should
nevertheless pay attention to this. In any case, take care to unplug completely the unit every time
you need to move it, or to move the turntable on which it is installed.
AP-7 Front Panel
o
(9)
ON/OFF
- Master switch, it turns the unit ON/OFF completely.
o
(10) VOL –
Turn the volume of the unit down.
o
(11) VOL + –
Turn the volume of the unit down. Pressing the (10) & (12) buttons
together the unit changes the input selection L1, L2, L3, L4.
o
(12) MUTE –
To activate only from the remote from MUTE button
5
