Gold Note A6 EVO User Manual Download Page 12

|

 POSITIONING THE

| LOUDSPEAKERS

5

The dimensions of your listening room don’t 

have as much of an effect on the audio 

quality as the position of the loudspeakers so 

we recommend placing them carefully. The 

better the positioning, the better the focus 

and the sound stage will be.

Managing reflective surfaces is a key factor 

to get the best out of your loudspeakers, 

especially because the sound waves carry 

enough energy to bounce off surfaces twice, 

affecting the sound performance of the 

system greatly.

Depending on the size of the room and 

the materials, the first reflection can create 

a 25m/s delay disturbing the sound. 

Reflections creating delays between 40 and 

80m/s are less important as they contribute 

to creating the so-called ambience. 

Therefore it is very important to mitigate 

reflections resulting in 25m/s delays.

We recommend placing the loudspeakers 

as far as possible from the sidewalls 

and covering the floor in front of them 

with carpets if possible. Ensuring the 

loudspeakers are located at the same 

distance from the walls to the sides as the 

one at the back (symmetrical layout) can be 

highly beneficial.

WALL MATERIAL

Thick walls provide good control over the 

bass extension as well as acoustic insulation. 

Dry and thin walls can vibrate, therefore 

they are usually to be avoided or treated 

accordingly.

CEILING

High ceilings tend to offer better results, with 

an ideal constant height of 2,50m to 3,60m. 

Vaulted ceilings can be difficult to deal with 

as they act as a magnifier lens for specific 

frequencies.

If the ceiling is not flat but at an angle, we 

recommend to position the loudspeakers 

closer to the side where the ceiling is lower 

while the listening point should be where the 

ceiling is higher.

FLOOR

Marble and hard-stone floors are difficult to 

manage due to the reflections they create. 

Carpeted floors can also prove difficult 

because of how they absorb the sound 

waves. Wooden floors tend to perform well 

in most cases.

In any case, floors can be easily treated with 

a 2/4cm thick carpet placed in front of the 

loudspeakers.

SIDE WALLS

You should avoid naked side walls around 

the system as well as hanging carpets. 

Hanging objects, such as framed pictures 

and paintings, are usually okay if they 

come without glass protections and are 

located symmetrically on both sides of the 

loudspeakers. Treating the walls with wall 

sound traps and diffusers tends to give the 

best results.

Summary of Contents for A6 EVO





















































Reviews: