STEP 1
Carefully place the loudspeaker upside
down or alternatively lay it horizontally on
a table to assemble the stand, covering the
supporting surface with a soft cloth to avoid
scratches and other damages to the cabinet.
To lift the loudspeaker, you can use the bass
reflex port as a lifting point but pay attention
to avoid damaging the drivers.
STEP 2
Insert the spike feet into the 4 holes on the
base as shown in the picture below and
tighten them firmly to lock them in place.
STEP 3
Insert the M4x35 screws into the 4 outer
holes and firmly tighten them to join the
base.
STEP 4
Insert the M4x20 screws into the 2 central
holes and firmly tighten them to join the
base.
| ASSEMBLING THE STAND
3
STEP 5
Turn the loudspeaker upside down to
place the base on the ground ensuring the
spike feet sit on the spike pads to prevent
damages to the floor.
IMPORTANT
Please pay attention to the screws and
ensure you are using the correct type for
each step.
M4x35
M4x20
Spike feet
