Installation Instructions
Inspection of Shipment:
Unpack all cartons and check thoroughly for any damage that may have occurred during transit. Damage
claims should be filed immediately with the transportation company. Gold Medal is not responsible for
damage that occurs in transit.
Setup:
Your new Shavatron Ice Shaver Machine is completely assembled and tested at the factory.
Remove all packing material and tape before starting operation.
Electrical Requirements:
The following power supply must be provided:
Model No. 1020, 1020T: 120 Volts, 970 Watts, 60 Hz.
Model No. 1020EX, 1020TEX: 230 Volts, 820 Watts, 50Hz.
.
Your electrician must furnish sufficient current for proper machine operation. We recommend this ice shaver
machine be on a dedicated and circuit protected line. Failure to wire properly will void the warranty and can
result in damage to the light, motor and etc.
It is Gold Medal Products Company’s recommendation that this machine be plugged directly into a wall outlet.
The use of extension cords is not recommended due to safety risks and the ice shaver’s performance will be
sacrificed/reduced.
Before You Plug In Machine:
1. Make sure that the wall outlet can accept the three (3) prong grounded plug on the power supply cord.
2. The wall outlet must have the proper polarity. If in doubt, have a competent electrician inspect the outlet
and correct if necessary.
3.
DO NOT
use a three (3) prong grounded to two (2) prong un-grounded adapter.
4. If the optional 1078HD Chute is attached to your machine, follow the installation instructions provided
with the 1078HD Chute before operation.
