Hawaii’s Finest
Model No. 1027
Page 5
gmpopcorn.com
CARE AND CLEANING
Cleaning Instructions
1.
Remove lid by removing the wing nut and hinge pin.
2.
Remove the four plastic button screws that hold top hopper cover, and lift and
roll over.
3.
Disconnect wire harness at plug.
4.
Remove three thumb screws and remove impeller cover.
5.
Remove impeller knob, and lift impeller off. For removal of Impeller Knob a
screwdriver slot is supplied on bottom end of motor.
6.
Lift off bottom plastic base cover.
7.
Remove two stainless steel button screws holding chute.
8.
Wipe down all easily accessible areas with a clean, dry cloth.
Blade Cleaning Instructions
1.
Blade holder should be cleaned at weekly intervals. Begin removal by removing chute.
2.
Using blade adjustment knob, unscrew blade adjustment shaft and remove.
3.
Pull pivot pin out completely.
4.
Blade, blade holder assembly and spring are now free for removal.
5.
Remove the two blade retaining screws and remove blade.
6.
Wipe area and parts with clean, dry cloth.
7.
Assemble in opposite order as above.
The stainless steel body of the shaver can be kept clean with cleaner designed for stainless steel
and a clean cloth. We recommend Gold Medal Products Company’s authentic Watchdog Stainless
Steel Polish (Part No. 2088.)
NOTE:
Never use abrasives on the stainless steel body.
DANGER
Machine must be properly grounded to prevent electrical
shock to personnel.
DO NOT immerse in water.
Always unplug the equipment before cleaning or servicing.
Good sanitation practice demands that all food preparation equipment be cleaned regularly. A
clean looking, well-kept machine is one of the best ways of advertising your product.
WWW.CONCESSIONSTANDS.COM
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
concessionstands.com
