Hawaii’s Finest
Model No. 1027
Page 4
gmpopcorn.com
OPERATING INSTRUCTIONS
Controls and Their Functions
MAIN SWITCH
Turns shaver motor “ON” or “OFF”.
RESET SWITCH
Motor overload switch.
BLADE ADJUSTMENT KNOB
Adjusts the blade height to change the ice texture.
Ice Requirements
The Hawaii’s Finest can take ice cubes or block ice, if you break the block into pieces
approximately 2 to 3 inches in size.
NOTE:
The ice will not enter the shaving chute if the pieces are too large.
Operation of Hawaii’s Finest
1.
Allow ice to soften at least 1 hour in an ice cooler before use. Using ice straight from
the freezer affects the quality of the shaved ice as well as damage the shaver blade.
2.
Lift cover lid and load ice cubes about ½ full then close the lid. Be sure ice is loaded
evenly in each cavity. Place cup directly below the ice chute and turn power “ON”.
Failure to close the lid will cause machine not to operate!
3.
Adjust the blade height with the adjustment knob to achieve the preferred ice texture.
4.
To stop, turn power switch to the “OFF” position. Should the motor thermal protector
trip, reset it by pushing the red button. It is recommended the cause of over load be
found and eliminated before continuing. The machine may need to cool a bit before
the reset button may take effect.
NOTE:
Never allow any foreign or metallic objects around the shaver area of the Hawaii’s
Finest. Ice picks, scoops, and debris that may be in the ice often damage blades.
Main Switch
Reset Switch
Blade Adjustment
Knob
WWW.CONCESSIONSTANDS.COM
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
concessionstands.com
