MACHO POP
9
MODELS: 2553EX & 2554EX
Popping Instructions:
1. Turn both the KETTLE HEAT and KETTLE STIR MOTOR switches ON.
2. Wait until the Yellow Light and Audible Signal activate.
3. Load both a full corn/oil charge and Flavacol Seasoning Salt into the kettle. Close
the lids.
4. When the corn has finished popping, the Yellow Light and Audible Signal will “tell
you” to dump the kettle.
Remember:
If the Yellow Load - Dump light is turned on and the Signal is sounding
one
of the
following actions should be taken:
1. Load the corn and oil
or
2. Dump the popped corn from the kettle
or
3. Turn off the kettle heat switch when popping of corn is complete
On the final kettle of corn, it is a good idea to turn the KETTLE HEAT switch OFF just
as the lids are forced open by the popping corn. This procedure saves electricity
since the kettle has plenty of heat, and eliminates smoke/odor from any oil residue
that remains after you have finished popping.
When you are finished popping, make sure
“KETTLE HEAT”
and
“KETTLE MOTOR”
switches are turned
“OFF”.
NEVER LEAVE THE HEAT ON WHEN YOU ARE NOT POPPING CORN.
a
