36, 48 & 60 oz.
Export Model Series 2149, 2258, and 2297
Cornados
(100, 110, and 101, 111)
Page 8
gmpopcorn.com
Receptacle Wiring Diagram (for all Export Units)
A certified electrician must supply and install the required wall receptacle for this unit, follow
the IMPORTANT instructions shown.
This unit is designed to operate on single phase, 16 AMP, 4 wire supply. All electrical
components in this machine are 230 V. If the receptacle is wired incorrectly, the heat
elements/kettle and other electrical components could be at 400 V potential instead of the
needed 230 V, resulting in excessive temperatures in the heat elements (i.e.: kettle) and possible
fire, and/or damage to electrical components.
Before You Plug In Machine
1.
Make sure all machine switches are OFF before plugging equipment into receptacle.
2.
Make sure wall outlet can accept the grounded plugs (where applicable) on the power
supply cord.
3.
The wall outlet must have the proper polarity. If in doubt, have a competent
electrician inspect the outlet and correct if necessary.
4.
DO NOT
use a grounded to un-grounded receptacle adapter (where applicable).
5.
Install unit in a level position.
CAUTION
If the supply cord is damaged, it must be replaced by Gold Medal Products Co.,
its service agent or similarly qualified persons in order to avoid a hazard.
039_080614
3P+N+E IEC 309
(Front View)
3P+N+E IEC 309
(Back View)
PE-G
L2
L1
Connect to Black
(Hot) Wire
Connect to Brown
(Hot) Wire
Connect to
Green/Yellow
(Ground) Wire
Connect to Blue
(Neutral) Wire
L3
N
Not Used
(If 5 wires provided,
connect Grey here.)
