36, 48 & 60 oz.
Export Model Series 2149, 2258, and 2297
Cornados
(100, 110, and 101, 111)
Page 21
gmpopcorn.com
Removing Agitator Assembly
and Shaft Maintenance
The kettle’s agitator shaft should be removed every 3 months and lub
ricated with Never Seez
®
(Item No. 68751). See below for steps to remove and lubricate the agitator shaft.
Step 3:
Remove the agitator shaft and
lubricate with Never Seez
®
(Item No.
68751). Apply a small amount on the slope
and side of pin on the matching shaft.
Step 4:
Reinstall agitator assembly for use.
Step 1:
Turn unit OFF, and allow it to cool
completely before attempting to remove
agitator shaft.
On the bottom side of the kettle, hold the
Agitator Shaft firmly with Channel Lock
pliers.
NOTE:
The shaft has a left handed thread.
Steps to Remove the Agitator Assembly
and Lubricate Shaft
Tap bar in a
CLOCKWISE
direction
Step 2:
To loosen the Agitator Assembly,
tap the agitator’s welded bar
with a rubber
mallet in a CLOCKWISE direction, and
unscrew to remove.
Leave the Packing Cage/ Packing Cord
on the kettle hub intact.
If packing cage is
removed, then the packing cord should be
replaced (see next page, Replacing the
Packing Cord on Kettle Hub.)
Agitator Shaft
Agitator Assy’s
.
Welded Bar
Apply Never Seez®
to Agitator Shaft
Apply a small amount of Never Seez®
on slope and pin of the matching shaft.
