4
4. Rotate the stem’s lock nut clockwise to loosen it.
5. Stand and stretch your arm, holding the metal detector to make the search coil
above the ground for about 1/2 inches to 2 inches. Rotate the stem’s lock nut
counterclockwise to tighten it.
Caution: Don’t pull the aluminum stem totally out. Be aware of there is a plastic
ring, whose smaller rim should be upward when being assembled.
INSTALLING THE BATTERIES
Cautions:
1. Check the power switch on the front panel to make sure it is in the “OFF”
position.
2. Slide the left battery cover off in the direction of the arrow.
3. Place a 9V battery into the battery compartment matching the polarity symbols
(+ and -) marked inside and reinstall the left battery cover.
4. Slide the right battery cover off in the direction of the arrow.
5.
Place a 9V battery into the battery compartment matching the polarity symbols
(+ and -) marked inside and reinstall the right battery cover.
Caution:
If you don’t plan to use the unit for a week or more, remove the batteries.
Batteries can leak chemicals that can destroy electronic parts.
