3
and prolong the battery life.
PREPARATION
ASSEMBLING THE DETECTOR
Assembling your detector is easy and requires no special tools. Just follow these
steps:
1. Insert the latch on the liner into the assembly hole on the bottom of the control
box. Then slightly pull the handle in the direction of IN on the handle to fix the
latch in place. Tighten the fixing screw on the back properly.
2. Unscrew the knobs on the search coil, then remove the knobs and the
connector. Insert the stem and align the holes on the search coil bracket and
the stem. Push the connector through the holes, then replace and tighten the
knobs.
3. Wind the search coil cable around the stem and insert its plug into the relevant
jack.
Caution:
The search coil’s plug fits into the jack only one way. Do not force the
plug or you could damage it.
Don’t pull the cable if you want to pull out the plug from the jack.
