12
5. In modes of DISC, NOTCH and AUTO-NOTCH, slowly sweep a
sample of the material you want the detector to find (such as a gold
ring or a coin) 4~5 inches (10~12cm) or more above the face of the
searchcoil. When the detector detects any metal, it sounds a tone
and an arrow appears below the target icon. Also LCD displays the
depth of the target.
6. In ALL METAL mode, hold a metal sample one feet (25cm) or more
above the face of the searchcoil, then slowly move to searchcoil. If
the unit detects the object, it emits a tone and LCD displays the
depth of the object.
Note:
If you are using a coin, the detector will detect it more easily if you hold
it so a flat side is parallel with the flat side of the searchcoil. A sweep
with the side of coin over search coil might cause false indication and
unstable display of arrow.
Outdoor Testing and Use
1. Slide POWER to ON. Set the operating mode.
2. Find an area on the ground outside where there is no metal.
3. Place a sample of the material you want the detector to find (such
as a gold ring or a coin) on the ground.
Note:
If you are using valuable metal such as gold to test the detector, mark
the area where you place the item, to help you find it later. Do not place
it in tall grass or weeds.
4. Hold the seachcoil level to the ground about 2.5~5cm above the
surface, slowly move the search coil over the area where you
placed the sample, sweeping the search coil in a side-to-side
motion.
