5
ADJUSTING THE SEARCH COIL
Loosen the knobs at the search coil’s end, then adjust the search coil to
the desired angle. (The search coil should be parallel with the ground.)
Tighten the knobs just enough to keep the search coil from rotating or
wobbling.
INSTALLING BATTERIES
You need one 9V alkaline battery to power your detector.
Cautions:
Use only fresh battery of the required size and recommended type.
1.
If the detector is on, turn VOLUME (on the control housing) to OFF
(The control clicks.)
2.
Press on the battery compartment cover and slide the cover off in
the
direction of the arrow.
3.
Insert the battery into the compartment.
4.
Replace the cover.
Cautions:
Always remove old or weak battery; battery can leak chemicals
OPEN
